Primary Applications:

Residential, commercial, and light industrial applications wherever hard water is present (plumbing systems, water heaters, commercial ice machines, fountains, laundries, printing equipment, commercial dishwashers).

Other applications car and truck cooling systems, irrigation systems.

INSTALLATION

1. Place the Model 800 unit against the pipe or tube, with the GMX label facing away from the pipe.

2. Place the backing plate on the opposite side of the pipe, Align the backing plate holes with the holes in the unit. Please note: The backing plate is designed to be reversible. Place the two dimples toward the magnets for 5/8″ tubing, and away from the magnet for 1″ and larger pipes.

3. Insert bolts through the holes in the unit and the backing plate. Secure with wing-nuts.

4. Tighten the unit until it is snug against the pipe. Do not over-tighten!

5. Install the second unit in tandem with the first. Leave a 1″ space between them. Make sure the labels of both units are on the same side and face the same direction.

6. Place an additional 2 units on the line leaving the hot water heater including tankless heaters.